- Availability & Price
- Search SKU
Filter by attributes
- Connection Type
- Filter Type
- Flow Rate
- Micron Rating
Filter by manufacturer
TGE ATEX Approved Stainless Steel Filters for Technical and Industrial Gases - Clamp Connection
*PRODUCT IMAGE IS REPRESENTATIVE PROVIDED BY THE MANUFACTURER. DO NOT MAKE BUYING DECISIONS SOLEY BASED ON THE IMAGE. PLEASE VERIFY SPECIFICATIONS MEET YOUR REQUIREMENTS.
We are currently in the process of updating our website and literature.
Available gases: Natural gases, Nitrogen, Helium, Carbon Dioxide. Hydrogen under evaluation.
Biomethane is biogas which has been 'upgraded’ to Natural Gas quality for injection into a gas-grid or for use as a vehicle fuel. There are several biogas upgrading technologies on the market such as Water Scrubbers, Chemical Scrubbers, PSAs and Membranes which essentially remove CO2 from the raw biogas to achieve the highest possible methane content.
Depending on the upgrade process, varying degrees of filtration are necessary. Membranes and PSAs for example, often use oil-lubricated compressors to increase the gas pressure and thus need coalescing filters to protect the upgrading media from oil carryover. There can also be residues in the gas after the upgrade process which can be removed with particulate filters.
Parker can offer a range of high-performance coalescing and particulate filters specifically designed for operation with both raw biogas and biomethane with full compliance to ATEX and PED regulations.
For more information or a detailed discussion about your specific requirements please contact Parker or an authorised Parker distributor.
Read More...Available gases: Natural gases, Nitrogen, Helium, Carbon Dioxide. Hydrogen under evaluation.
Biomethane is biogas which has been 'upgraded’ to Natural Gas quality for injection into a gas-grid or for use as a vehicle fuel. There are several biogas upgrading technologies on the market such as Water Scrubbers, Chemical Scrubbers, PSAs and Membranes which essentially remove CO2 from the raw biogas to achieve the highest possible methane content.
Depending on the upgrade process, varying degrees of filtration are necessary. Membranes and PSAs for example, often use oil-lubricated compressors to increase the gas pressure and thus need coalescing filters to protect the upgrading media from oil carryover. There can also be residues in the gas after the upgrade process which can be removed with particulate filters.
Parker can offer a range of high-performance coalescing and particulate filters specifically designed for operation with both raw biogas and biomethane with full compliance to ATEX and PED regulations.
For more information or a detailed discussion about your specific requirements please contact Parker or an authorised Parker distributor.
| Action | Part No. | Availability | Partner Available | Price | Filter Efficiency Rating | Product Series | Filter Type | Technology | Division | Compatible Element | Residual Oil Content | Height | Operating Pressure | Width | Division | Application | Brand | Product Type | Connection Type | Flow Rate | Filter Type | Micron Rating |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| TGE308/16C-C/A | Quote Required | TBD | 99.9999 % | TGE ATEX Series | Stainless Steel | Filtration | Gas Separation and Filtration Division EMEA | TE09C | ≤ 0.5 mg/m³ | 9.4 inch | 232.0 psig Maximum | 85.0 mm | Gas Separation and Filtration Division EMEA | Filtration of Compressed Natural Gas | Parker | Natural Gas Filter | Clamp ASME BPE 1" | 220 m³/h @ 7 barg (129 cfm @ 102 psig) | Coalescing Prefilter | Down to 1 micron | ||
| TGE308/16CF-C/A | Quote Required | TBD | 99.99999 % | TGE ATEX Series | Stainless Steel | Filtration | Gas Separation and Filtration Division EMEA | TE09CF | ≤ 0.01 mg/m³ | 240.0 mm | 20 bar Maximum | 3.3 inch | Gas Separation and Filtration Division EMEA | Filtration of Compressed Natural Gas | Parker | Natural Gas Filter | Clamp ASME BPE 1" | 220 m³/h @ 7 barg (129 cfm @ 102 psig) | High Efficiency Coalescing | Down to 0.01 micron | ||
| TGE314/16C-C/A | Quote Required | TBD | 99.9999 % | TGE ATEX Series | Stainless Steel | Filtration | Gas Separation and Filtration Division EMEA | TE13C | ≤ 0.5 mg/m³ | 9.8 inch | 232.0 psig Maximum | 140.0 mm | Gas Separation and Filtration Division EMEA | Filtration of Compressed Natural Gas | Parker | Natural Gas Filter | Clamp ASME BPE 1½" | 500 m³/h @ 7 barg (294 cfm @ 102 psig) | Coalescing Prefilter | Down to 1 micron | ||
| TGE314/16CF-C/A | Quote Required | TBD | 99.99999 % | TGE ATEX Series | Stainless Steel | Filtration | Gas Separation and Filtration Division EMEA | TE13CF | ≤ 0.01 mg/m³ | 9.8 inch | 16 bar Maximum | 5.5 inch | Gas Separation and Filtration Division EMEA | Filtration of Compressed Natural Gas | Parker | Natural Gas Filter | Clamp ASME BPE 1½" | 500 m³/h @ 7 barg (294 cfm @ 102 psig) | High Efficiency Coalescing | Down to 0.01 micron | ||
| TGE316/16C-C/A | Quote Required | TBD | 99.9999 % | TGE ATEX Series | Stainless Steel | Filtration | Gas Separation and Filtration Division EMEA | TE14C | ≤ 0.5 mg/m³ | 233.0 mm | 20 bar Maximum | 11 inch | Gas Separation and Filtration Division EMEA | Filtration of Compressed Natural Gas | Parker | Natural Gas Filter | Clamp ASME BPE 2" | 780 m³/h @ 7 barg (459 cfm @ 102 psig) | Coalescing Prefilter | Down to 1 micron | ||
| TGE316/16CF-C/A | Quote Required | TBD | 99.99999 % | TGE ATEX Series | Stainless Steel | Filtration | Gas Separation and Filtration Division EMEA | TE14CF | ≤ 0.01 mg/m³ | 9.2 inch | 232.0 psig Maximum | 11 inch | Gas Separation and Filtration Division EMEA | Filtration of Compressed Natural Gas | Parker | Natural Gas Filter | Clamp ASME BPE 2" | 780 m³/h @ 7 barg (459 cfm @ 102 psig) | High Efficiency Coalescing | Down to 0.01 micron | ||
| TGE318/16C-C/A | Quote Required | TBD | 99.9999 % | TGE ATEX Series | Stainless Steel | Filtration | Gas Separation and Filtration Division EMEA | TE18C | ≤ 0.5 mg/m³ | 9.2 inch | 232.0 psig Maximum | 20.9 inch | Gas Separation and Filtration Division EMEA | Filtration of Compressed Natural Gas | Parker | Natural Gas Filter | Clamp ASME BPE 2" | 1150 m³/h @ 7 barg (677 cfm @ 102 psig) | Coalescing Prefilter | Down to 1 micron | ||
| TGE318/16CF-C/A | Quote Required | TBD | 99.99999 % | TGE ATEX Series | Stainless Steel | Filtration | Gas Separation and Filtration Division EMEA | TE18CF | ≤ 0.01 mg/m³ | 9.2 inch | 290.0 psig Maximum | 20.9 inch | Gas Separation and Filtration Division EMEA | Filtration of Compressed Natural Gas | Parker | Natural Gas Filter | Clamp ASME BPE 2" | 1150 m³/h @ 7 barg (677 cfm @ 102 psig) | High Efficiency Coalescing | Down to 0.01 micron |