- Availability & Price
- Search SKU
Filter by manufacturer
Seal-Lok O-Ring Face Seal Tube Fittings and Adapters
*PRODUCT IMAGE IS REPRESENTATIVE PROVIDED BY THE MANUFACTURER. DO NOT MAKE BUYING DECISIONS SOLEY BASED ON THE IMAGE. PLEASE VERIFY SPECIFICATIONS MEET YOUR REQUIREMENTS.
Parker's O-ring Face Seal (ORFS) Tube Fittings and Adapters, Seal-Lok, meet or exceed the requirements of both SAE J1453 and ISO 8434-3 and have international acceptance. O-ring face seal fittings offer zero clearance, resistance to over torque and vibration resistance making it an ideal reusable hydraulic fitting solution across many markets. Seal-Lok tube fittings and adapters come in steel and stainless steel. Parker's Trap-Seal for ORFS improves customer experience by eliminating potential hydraulic leaks caused by O-ring fall-out and O-ring pinch during assembly. This provides customers a competitive advantage while leading to reduced overall cost.
Markets:
• Construction
• Military Ground Systems
• Aerial Lift
• Agriculture
• Material Handling
• Military Marine
• Machine Tool
• Transportation
• Alternative Energy
• Off-Shore/Oil & Gas
Features/Benefits:
• Highly resistant to over-torque, withstanding 200% torque above the rated value without any damage to the fitting, creating unlimited reusability.
• Flat sealing surface allows for zero clearance installation.
• Suitable for a wide range of wall thicknesses and are adaptable to inch tube, metric tube and hose.
• Patented Trap-Seal design provides optimal seal retention in ORFS CORG groove and prevents seal pinch during assembly.
• Patent-pending FastSeal connection technology is new way to make fast, leak-free ORFS tube connections without the need for brazing or flanging equipment. Only a wrench and tube is needed. FastSeal is available under the Seal-Lok Nut selection option. See the Product Support tab for more information on FastSeal.
• Steel fittings come standard with ToughShield Plus plating which substantially exceeds the SAE corrosion hour requirements for red rust, lasting up to 3,000 hours without red rust as found by an independent test facility (tested to ASTM B117/ISO 9227). This enhanced performance provides customers with a competitive advantage through less downtime and extended equipment life, leading to increased revenues and reduced warranty costs.
• Parker's Robust Port Stud on adjustable ports is manufactured with a longer locknut virtually eliminating washer damage and potential leaks, as well as making assembly virtually mistake-proof. This feature improves customer internal efficiencies and reduces rework costs resulting from backup washer damage commonly seen with traditional SAE adjustable port ends in the market.
• Offered in steel and stainless steel in sizes 1/4" through 2” with working pressures up to 9200 psi.
Applications:
• Hydraulic fluid and gas handling connections
Read More...Markets:
• Construction
• Military Ground Systems
• Aerial Lift
• Agriculture
• Material Handling
• Military Marine
• Machine Tool
• Transportation
• Alternative Energy
• Off-Shore/Oil & Gas
Features/Benefits:
• Highly resistant to over-torque, withstanding 200% torque above the rated value without any damage to the fitting, creating unlimited reusability.
• Flat sealing surface allows for zero clearance installation.
• Suitable for a wide range of wall thicknesses and are adaptable to inch tube, metric tube and hose.
• Patented Trap-Seal design provides optimal seal retention in ORFS CORG groove and prevents seal pinch during assembly.
• Patent-pending FastSeal connection technology is new way to make fast, leak-free ORFS tube connections without the need for brazing or flanging equipment. Only a wrench and tube is needed. FastSeal is available under the Seal-Lok Nut selection option. See the Product Support tab for more information on FastSeal.
• Steel fittings come standard with ToughShield Plus plating which substantially exceeds the SAE corrosion hour requirements for red rust, lasting up to 3,000 hours without red rust as found by an independent test facility (tested to ASTM B117/ISO 9227). This enhanced performance provides customers with a competitive advantage through less downtime and extended equipment life, leading to increased revenues and reduced warranty costs.
• Parker's Robust Port Stud on adjustable ports is manufactured with a longer locknut virtually eliminating washer damage and potential leaks, as well as making assembly virtually mistake-proof. This feature improves customer internal efficiencies and reduces rework costs resulting from backup washer damage commonly seen with traditional SAE adjustable port ends in the market.
• Offered in steel and stainless steel in sizes 1/4" through 2” with working pressures up to 9200 psi.
Applications:
• Hydraulic fluid and gas handling connections
| Action | Part No. | Availability | Partner Available | Price | UOM | Division | Maximum Dynamic Pressure | Shape | Body Material | O-Ring Material | Specifications Met | Connection Type | Connection 1 Type | Connection 3 Type | Connection 4 Type | Connection 2 Thread Size | Connection 3 Thread Size | Connection 2 Tube Outside Diameter | Connection 3 Tube Outside Diameter | Connection 4 Tube Outside Diameter | Connection 2 Type | Connection 1 Tube Outside Diameter | Dimensional Weight |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 16-24F42EDMLOS | Quote Required | $144.96 | EA | Tube Fittings Division | 5000 psi | Straight | Steel | 90 Durometer Nitrile | SAE J1453 | O-ring Face Seal | Male O-Ring Face Seal | na | na | na | na | na | na | na | Male BSPP ED Seal | 22, 25 mm | |||
| 16-4R6P4MLOS | Quote Required | TBD | Tube Fittings Division | 6000 psi | Stright | Steel | 90 Durometer Nitrile | SAE J1453 | O-ring Face Seal | Male O-Ring Face Seal | EMA3 test point | na | 1 7/16-12 | na | 1 inch | na | na | Female O-Ring Face Seal Swivel | 1 inch | ||||
| 16-8 TL-S | Quote Required | TBD | Tube Fittings Division | na | Sleeve | Steel | na | SAE J1453 | na | Braze Sleeve Reducer | na | na | na | na | na | na | na | Braze Sleeve | 1 inch | 0.07913669064748201 lb | |||
| 16-8 TRLON-S | 6 In Stock | 103 In Stock | $32.79 | EA | Tube Fittings Division | 6000 psi | Straight | Steel | 90 Durometer Nitrile | SAE J1453 | O-ring Face Seal | Female O-Ring Face Seal with Large Nut | na | na | na | na | 1/2 inch | na | na | Male O-Ring Face Seal Tube End | 22, 25 mm | 0.10280463129496402 lb | |
| 16-8 TRLON-S FKM | Quote Required | TBD | Tube Fittings Division | 6000 psi | Straight | Steel | 90 Durometer Fluorocarbon | SAE J1453 | O-ring Face Seal | Female O-Ring Face Seal with Large Nut | na | na | na | na | 1/2 inch | na | na | Male O-Ring Face Seal Tube End | 1 inch | 0.12464028776978417 lb | |||
| 16-8 TRLON-S ZJ | Quote Required | TBD | Tube Fittings Division | 6000 | Straight | XTR | 90 Durometer Nitrile | SAE J1453 | O-ring Face Seal | Female O-Ring Face Seal Swivel | na | na | na | na | 1/2 | na | na | Male O-Ring Face Seal Tube End | 1 | ||||
| 16-8 TRLON-SS | Quote Required | TBD | Tube Fittings Division | 6000 psi | Straight | Stainless Steel | 90 Durometer Nitrile | SAE J1453 | O-ring Face Seal | Female O-Ring Face Seal with Large Nut | na | na | na | na | 1/2 inch | na | na | Male O-Ring Face Seal Tube End | 1 inch | 0.12464028776978417 lb | |||
| 16-8 TRLON-SS FKM | Quote Required | TBD | Tube Fittings Division | 6000 psi | Straight | Stainless Steel | 90 Durometer Fluorocarbon | SAE J1453 | O-ring Face Seal | Female O-Ring Face Seal with Large Nut | na | na | na | na | 1/2 inch | na | na | Male O-Ring Face Seal Tube End | 22, 25 mm | 0.12464028776978417 lb | |||
| 16-8F42EDMLOS | Quote Required | TBD | Tube Fittings Division | 6000 psi | Straight | Steel | 90 Durometer Nitrile | SAE J1453 | O-ring Face Seal | Male O-Ring Face Seal | na | na | 1/2-14 inch | na | na | na | na | Male BSPP ED Seal | 1 inch | ||||
| 16-8TRMLOSS | Quote Required | TBD | Tube Fittings Division | 6000 psi | Straight | Stainless Steel | 90 Durometer Nitrile | SAE J1453 | Tube to Tube Reducer | Female O-Ring Face Seal Swivel | na | na | na | na | 1 inch | na | na | Male O-Ring Face Seal Tube End | 1 inch | ||||
| 16BMLS | Quote Required | TBD | Tube Fittings Division | na | Nut with Metric Hex | Steel | na | SAE J1453 | na | Female O-Ring Face Seal | na | na | na | na | na | na | na | na | 1 inch | 0.06474820143884892 lb | |||
| 16BMLSS | Quote Required | TBD | Tube Fittings Division | na | Nut with Metric Hex | Stainless Steel | na | SAE J1453 | na | Female O-Ring Face Seal | na | na | na | na | na | na | na | na | 1 inch | ||||
| 16C4OMLOS | 11 In Stock | 5 In Stock | $115.83 | EA | Tube Fittings Division | 4000 psi | 90° Elbow | Steel | 90 Durometer Nitrile | SAE J1453 | O-ring Face Seal | Male O-Ring Face Seal | na | na | na | na | na | na | na | Male BSPP O-Ring Retaining Ring | 1 inch | 0.23980815347721823 lb | |
| 16C4OMLOS FKM | Quote Required | TBD | Tube Fittings Division | 4000 psi | 90° Elbow | Steel | 90 Durometer Fluorocarbon | SAE J1453 | Tube to BSPP-ORR | Male O-Ring Face Seal | na | na | 1-11 inch | na | na | na | na | Male BSPP O-Ring Retaining Ring | 22, 25 mm | ||||
| 16C4OMLOSS | Quote Required | TBD | Tube Fittings Division | 2900 psi | 90° Elbow | Stainless Steel | 90 Durometer Nitrile | SAE J1453 | Tube to BSPP-ORR | Male O-Ring Face Seal | na | na | 25 mm | na | na | na | na | Male BSPP O-Ring Retaining Ring | 1 inch | ||||
| 16C5OMLOS | Quote Required | TBD | Tube Fittings Division | ||||||||||||||||||||
| 16C6MLOS | Quote Required | $49.28 | EA | Tube Fittings Division | 6000 psi | 90° Elbow | Steel | 90 Durometer Nitrile | SAE J1453 | O-ring Face Seal | Male O-Ring Face Seal | na | na | na | na | 1 inch | na | na | Female O-Ring Face Seal Swivel | 1 inch | 0.22473021582733813 lb | ||
| 16EMLOS | Quote Required | TBD | Tube Fittings Division | 6000 psi | 90° Elbow | Steel | 90 Durometer Nitrile | SAE J1453 | Tube to Tube with Metric Hex | Male O-Ring Face Seal | na | na | na | na | 1 inch | na | na | Male O-Ring Face Seal | 1 inch | ||||
| 16EMLOS FKM | Quote Required | TBD | Tube Fittings Division | 6000 psi | 90° Elbow | Steel | 90 Durometer Fluorocarbon | SAE J1453 | O-ring Face Seal | Male O-Ring Face Seal | na | na | na | na | 22, 25 mm | na | na | Male O-Ring Face Seal | 1 inch | ||||
| 16EMLOSS | Quote Required | TBD | Tube Fittings Division | 6000 psi | 90° Elbow | Stainless Steel | 90 Durometer Nitrile | SAE J1453 | Tube to Tube with Metric Hex | Male O-Ring Face Seal | na | na | na | na | 1 inch | na | na | Male O-Ring Face Seal | 1 inch |
