Tube Fitting Caps and Plugs

The Parker plug is used to plug a port on a Parker tube fitting (single ferrule or two ferrule), and it has machined ferrule(s) already inside. The Parker cap is used to cap off a piece of instrumentation tubing. It is a complete Parker assembly and includes a nut, a front ferrule, a back ferrule (two ferrule A-LOK fitting only), and a tube fitting body which is blank. Both the plug and cap can be pressurized in order for systems to be pressure tested to the maximum pressure rating of the system.

Parker Tube Fitting Caps and Plugs are available for fractional tube sizes from 1/16” through to 2” O.D. and for metric sizes from 2 mm through to 25 mm O.D. across a range of corrosion resistant materials.

Industries:
• Chemical
• Transportation
• Power
• Oil and Gas
• Research Labs

Features/Benefits:
• Plugs for plugging open ended CPI™ / A-LOK® fitting ends
• Caps for capping open ended tubing can be disassembled and reasembled many times while retaining a leak tight seal - ensure system has been depressurized before doing so
• NACE and NORSOK standard
• Oxygen cleaning option - "OXY" suffix to part number

Applications:
• Instrumentation Hook-up Systems
• Analytical Installations
• Offshore Control Panels
• Sensing Lines