| Filter Efficiency Rating | ISO 4406 18/16/13, SAE Class 4 | Current | Max: 1.15 @ 12 VDC, 0.58 @ 24 VDC A |
| Override Functionality | n/a | Valve Material | All parts steel. All operating parts hardened steel |
| Flow Direction | Top to Side (3 - 2) | Connection Type | n/a |
| Minimum Pressure Differential | 150 psi | Maximum Inlet Pressure Rating | 210 bar |
| Division | Hydraulic Systems Division | Wire Mesh Screen Included | No |
| Body Material | n/a | Leak Rate | 570 @ 3000 PSI (210 BAR) cm3/min |
| Division | Hydraulic Cartridge Systems Division | Weight | 0.17 lb |
| Coil Nut Tightening Torque | 4.1 Nm | Maximum Flow Rate | 2.0 Gal/min |
| Connection Size | n/a | Seal Material | Nitrile |
| For Fluid Type | Mineral-based or synthetic hydraulic fluids | Maximum Kinematic Viscosity | 45-2000 SSU (6 to 420 cSt) |
| Cavity Size | C08-3 | Minimum Operating Temperature | -30 °F |
| Operating Temperature | -34 to +121 °C | Power Consumption | 14 W |
| Coil Type | 1/2" Super Coil Low Watt (CCS) | Frequency | 100-400 Hz |
| Actuation Type | Electrical | Maximum Operating Temperature | +250 °F |
| Variation of Closing Point | N/A | Maximum Operating Pressure | 3000 psi |
| Installation Torque | 27 Nm | Operation Type | Solenoid Operated |
| Flow Rate Accuracy | Up to 20% | Function | Proportional Flow Control/Regulator |
| Configuration | Normally Closed, Pressure Compensated | Hysteresis | < 10% |
| Variation of Opening Point | 25% of Input Signal | Flow Rate | 2 Gal/min |
| Configuration | Normally Closed, Pressure Compensated | Actuation Type | Electrical |
| Flow Rate | 2 GAL/MIN, 7.5 L/MIN | Seal Material | Nitrile |
