Parker E2E125ZNMK2 - Standard Pilot Assisted Load Control Valves

Parker’s piloted load control valves are designed to operate independent of downstream pressure to prevent runaway loads under dynamic conditions using a pilot signal, handling pressures up to 420 bar (6000 psi) and flows up to 350 lpm (90 gpm).
AFP Availability:
Quote Required
Partner Available:2 Limited Stock
Brand Parker
Part No. E2E125ZNMK2
$583.20/each
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
Products specifications
Attribute nameAttribute value
UOMEALeak Rate6 @ 1450 PSI (100 BAR) drops/min
Body MaterialN/AMounting TypeThreaded Cartridge Valve
Maximum Flow Rate200 L/minPort SizeN/A
Installation Torque74 lb-ftOperating Temperature-34 to +121 °C
DivisionMobile Hydraulic Systems Division EuropePilot LocationExternal
Minimum Operating Temperature-34 °CFlow Rate200 L/min
Weight1.65 lbPort Thread SizeN/A
Seal MaterialNitrileActuation TypePilot Operated
Holding Pressure215 barValve MaterialAll parts steel. All operating parts hardened steel
Flow DirectionCylinder port 1, Valve port 2, Pilot port 3Maximum Kinematic Viscosity45-2000 SSU (6 to 420 cSt)
Maximum Inlet Pressure Rating5000 psiMaximum Operating Pressure5000 psi
Filter Efficiency RatingISO 4406:1999 Code 18/16/13Adjustment MechanismScrew
FunctionCounterbalance ValvePilot Pressure Ratio3:01
Pressure Control Sensitivity34 per turn barMaximum Operating Temperature+250 °F
For Fluid TypeMineral-based or synthetic hydraulic fluidsDivisionHydraulic Cartridge Systems Division
Pressure Control Range725-5000 psiCavity Size3M
Seal MaterialNitrilePort Sizen/a
Adjustment MechanismScrewMounting TypeThreaded Cartridge Valve
Pilot Pressure Ratio3:1Holding Pressure3120 PSI, 215 BAR
Maximum Flow Rate53 GAL/MIN, 200 L/MINPressure Control Range725-5000 PSI, 50-350 BAR
Product resources