- Availability & Price
- Search SKU
Filter by attributes
- Core Cover Material
- Core Type
- End Cap Configuration
- End Cap Finish
- End Cap Material
- Length (inch)
- Media
- Micron Rating (µm)
- Packaging
- Seal Material
Filter by manufacturer
Recently viewed products
Fulflo XTL Wound Filter Cartridges | Extended life design technology for increased life and performance
*PRODUCT IMAGE IS REPRESENTATIVE PROVIDED BY THE MANUFACTURER. DO NOT MAKE BUYING DECISIONS SOLEY BASED ON THE IMAGE. PLEASE VERIFY SPECIFICATIONS MEET YOUR REQUIREMENTS.
The unique construction of Parker’s patented Fulflo® XTL™ (extended life) filter cartridges provides twice the average life of conventionally wound filter cartridges for process fluid filtration. Computer modeling has optimized the wound cartridge geometry maximizing the use of the internal cartridge surface area. The enhanced design provides improved dirt-holding capacity (twice the average) over standard wound cartridges, while providing true controlled depth filtration.
Fulflo XTL cartridges are available in nominal (90%) ratings of 1μm, 3μm, 5μm, 10μm, 20μm and 30μm.
Features/Benefits
• Result in significant cost savings based on fewer system interruptions, decreased labor expenses for change outs, & reduced inventory and cartridge disposal costs
• Unique computer programming capability permits the design and manufacture of special cartridge constructions to suit requirements of nearly any filtration application
• “M” polypropylene and “C” cotton materials are FDA listed as acceptable for potable and edible liquid contact according to CFR Title 21
• Continuous strand roving geometry provides performance consistency
• XTL wound cartridges fit all Fulflo vessels and most competitive vessels without compromising final product clarity or flow characteristics of the cartridge. The most noticeable difference is the extended life savings offered by XTL cartridges
• Extended center cores are available in tinned steel, 316 stainless steel and 304 stainless steel
• A special snap-in extender is available for polypropylene cores
• FDA grade polypropylene (DOE only) certified to ANSI/NSF61 standard for contact with drinking water components
Applications
• Potable Liquid Filtration
• Organic Solvent Filtration
• Process Water Filtration
• Photoprocessing Filtration
• Lubricant Filtration
• R.O. Pre-filtration
• Amines Filtration
• Chemical Process Filtration
Read More...Fulflo XTL cartridges are available in nominal (90%) ratings of 1μm, 3μm, 5μm, 10μm, 20μm and 30μm.
Features/Benefits
• Result in significant cost savings based on fewer system interruptions, decreased labor expenses for change outs, & reduced inventory and cartridge disposal costs
• Unique computer programming capability permits the design and manufacture of special cartridge constructions to suit requirements of nearly any filtration application
• “M” polypropylene and “C” cotton materials are FDA listed as acceptable for potable and edible liquid contact according to CFR Title 21
• Continuous strand roving geometry provides performance consistency
• XTL wound cartridges fit all Fulflo vessels and most competitive vessels without compromising final product clarity or flow characteristics of the cartridge. The most noticeable difference is the extended life savings offered by XTL cartridges
• Extended center cores are available in tinned steel, 316 stainless steel and 304 stainless steel
• A special snap-in extender is available for polypropylene cores
• FDA grade polypropylene (DOE only) certified to ANSI/NSF61 standard for contact with drinking water components
Applications
• Potable Liquid Filtration
• Organic Solvent Filtration
• Process Water Filtration
• Photoprocessing Filtration
• Lubricant Filtration
• R.O. Pre-filtration
• Amines Filtration
• Chemical Process Filtration
| Action | Part No. | Availability | Partner Available | Price | Filter Construction | Flow Rate | Media | Division | Outside Diameter | Specifications Met | Industry | Inside Diameter | Function | Brand | Media | End Cap Finish | Micron Rating (µm) | Core Cover Material | End Cap Configuration | End Cap Material | Core Type | Length (inch) | Packaging | Seal Material |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| XTL5M10YZ | Quote Required | TBD | Wound | 5 gal/min per 10 inch | Polypropylene FDA grade | Industrial Process Filtration Division | 2-1/2 | FDA, ANSI/NSF61 | Food and beverage | 1 | Clarification/Prefiltration/Polishing | domnick hunter | POLYPROPYLENE FDA GRADE | No treatment | 5 | Polypropylene | DOE | None | Tinned steel | 10 | Individual Poly Bag | Standard DOE | ||
| XTL5M20A | Quote Required | TBD | Wound | 5 gal/min per 10 inch | Polypropylene FDA grade | Industrial Process Filtration Division | 2-1/2 | FDA, ANSI/NSF61 | Food and beverage | 1 | Clarification/Prefiltration/Polishing | domnick hunter | POLYPROPYLENE FDA GRADE | No treatment | 5 | No Cover | DOE | None | Polypropylene | 20 | Standard | Standard DOE | ||
| XTL5M20A-TC-E | Quote Required | TBD | Wound | 5 gal/min per 10 inch | Polypropylene FDA grade | Industrial Process Filtration Division | 2-1/2 | FDA | Food and beverage | 1 | Clarification/Prefiltration/Polishing | domnick hunter | POLYPROPYLENE FDA GRADE | No treatment | 5 | No Cover | 222 O-ring/Flat cap | Polypropylene | Polypropylene | 20 | Standard | EPR | ||
| XTL5M20G | Quote Required | TBD | Wound | 5 gal/min per 10 inch | Polypropylene FDA grade | Industrial Process Filtration Division | 2-1/2 | FDA, ANSI/NSF61 | Food and beverage | 1 | Clarification/Prefiltration/Polishing | domnick hunter | POLYPROPYLENE FDA GRADE | No treatment | 5 | No Cover | DOE | None | 304 Stainless steel | 20 | Standard | Standard DOE | ||
| XTL5M29-4A | Quote Required | TBD | Wound | 5 gal/min per 10 inch | Polypropylene FDA grade | Industrial Process Filtration Division | 2-1/2 | FDA, ANSI/NSF61 | Food and beverage | 1 | Clarification/Prefiltration/Polishing | domnick hunter | POLYPROPYLENE FDA GRADE | No treatment | 5 | No Cover | DOE | None | Polypropylene | 29 1/4 | Standard | Standard DOE | ||
| XTL5M29-4AL | Quote Required | TBD | Wound | 5 gal/min per 10 inch | Polypropylene FDA grade | Industrial Process Filtration Division | 2-1/2 | FDA | Oil and Gas | 1 | Clarification/Prefiltration/Polishing | domnick hunter | POLYPROPYLENE FDA GRADE | LAQUER | 5 | No Cover | DOE | None | Polypropylene | 29 1/4 | Standard | Standard DOE | ||
| XTL5M30A | Quote Required | TBD | Wound | 5 gal/min per 10 inch | Polypropylene FDA grade | Industrial Process Filtration Division | 2-1/2 | FDA, ANSI/NSF61 | Oil and Gas | 1 | Clarification/Prefiltration/Polishing | domnick hunter | POLYPROPYLENE FDA GRADE | No treatment | 5 | No Cover | DOE | None | Polypropylene | 30 | Standard | Standard DOE | ||
| XTL5M30A3-SF-N | Quote Required | TBD | Wound | 5 gal/min per 10 inch | Polypropylene FDA grade | Industrial Process Filtration Division | 2-1/2 | FDA | Oil and Gas | 1 | Clarification/Prefiltration/Polishing | domnick hunter | POLYPROPYLENE FDA GRADE | No treatment | 5 | No Cover | 226 O-Ring/Fin | Polypropylene | Glass Filled Polypropylene | 30 | Standard | Buna-N | ||
| XTL5M30A-SF-S | Quote Required | TBD | Wound | 5 gal/min per 10 inch | Polypropylene FDA grade | Industrial Process Filtration Division | 2-1/2 | FDA | Oil and Gas | 1 | Clarification/Prefiltration/Polishing | domnick hunter | POLYPROPYLENE FDA GRADE | No treatment | 5 | No Cover | 226 O-Ring/Fin | Polypropylene | Polypropylene | 30 | Standard | S7442 | ||
| XTL5M30A-SF-SZ | Quote Required | TBD | Wound | 5 gal/min per 10 inch | Polypropylene FDA grade | Industrial Process Filtration Division | 2-1/2 | FDA | Oil and Gas | 1 | Clarification/Prefiltration/Polishing | domnick hunter | POLYPROPYLENE FDA GRADE | No treatment | 5 | No Cover | 226 O-Ring/Fin | Polypropylene | Polypropylene | 30 | Individual Poly Bag | S7442 | ||
| XTL5M30G | Quote Required | TBD | Wound | 5 gal/min per 10 inch | Polypropylene FDA grade | Industrial Process Filtration Division | 2-1/2 | FDA, ANSI/NSF61 | Oil and Gas | 1 | Clarification/Prefiltration/Polishing | domnick hunter | POLYPROPYLENE FDA GRADE | No treatment | 5 | No Cover | DOE | None | 304 Stainless steel | 30 | Standard | Standard DOE | ||
| XTL5M39-4A | Quote Required | TBD | Wound | 5 gal/min per 10 inch | Polypropylene FDA grade | Industrial Process Filtration Division | 2-1/2 | FDA, ANSI/NSF61 | Oil and Gas | 1 | Clarification/Prefiltration/Polishing | domnick hunter | POLYPROPYLENE FDA GRADE | No treatment | 5 | No Cover | DOE | None | Polypropylene | 39 | Standard | Standard DOE | ||
| XTL5M40 | Quote Required | TBD | Wound | 5 gal/min per 10 inch | Polypropylene FDA grade | Industrial Process Filtration Division | 2-1/2 | FDA, ANSI/NSF61 | Oil and Gas | 1 | Clarification/Prefiltration/Polishing | domnick hunter | POLYPROPYLENE FDA GRADE | No treatment | 5 | No Cover | DOE | None | Tinned steel | 40 | Standard | Standard DOE | ||
| XTL5M40A | Quote Required | TBD | Wound | 5 gal/min per 10 inch | Polypropylene FDA grade | Industrial Process Filtration Division | 2-1/2 | FDA, ANSI/NSF61 | Oil and Gas | 1 | Clarification/Prefiltration/Polishing | domnick hunter | POLYPROPYLENE FDA GRADE | No treatment | 5 | No Cover | DOE | None | Polypropylene | 40 | Standard | Standard DOE | ||
| XTL5M40AXA | Quote Required | TBD | Wound | 5 gal/min per 10 inch | Polypropylene FDA grade | Industrial Process Filtration Division | 2-1/2 | FDA, ANSI/NSF61 | Oil and Gas | 1 | Clarification/Prefiltration/Polishing | domnick hunter | POLYPROPYLENE FDA GRADE | No treatment | 5 | No Cover | DOE with polypropylene extender | None | Polypropylene | 40 | Standard | Standard DOE | ||
| XTL5M40S | Quote Required | TBD | Wound | 5 gal/min per 10 inch | Polypropylene FDA grade | Industrial Process Filtration Division | 2-1/2 | FDA, ANSI/NSF61 | Oil and Gas | 1 | Clarification/Prefiltration/Polishing | domnick hunter | POLYPROPYLENE FDA GRADE | No treatment | 5 | No Cover | DOE | None | 316 Stainless steel | 40 | Standard | Standard DOE | ||
| XTL5M9-4AZ | Quote Required | TBD | Wound | 5 gal/min per 10 inch | Polypropylene FDA grade | Industrial Process Filtration Division | 2-1/2 | FDA, ANSI/NSF61 | Oil and Gas | 1 | Clarification/Prefiltration/Polishing | domnick hunter | POLYPROPYLENE FDA GRADE | No treatment | 5 | No Cover | DOE | None | Polypropylene | 9 7/8 | Individual Poly Bag | Standard DOE | ||
| XTL5T10 | Quote Required | TBD | Wound | 5 gal/min per 10 inch | Polypropylene | Industrial Process Filtration Division | 2-1/2 | N/A | Industrial | 1 | Clarification/Prefiltration/Polishing | domnick hunter | Polypropylene | No treatment | 5 | No Cover | DOE | None | Tinned steel | 10 | Standard | Standard DOE | ||
| XTL5T10A | Quote Required | TBD | Wound | 5 gal/min per 10 inch | Polypropylene | Industrial Process Filtration Division | 2-1/2 | N/A | Industrial | 1 | Clarification/Prefiltration/Polishing | domnick hunter | Polypropylene | No treatment | 5 | No Cover | DOE | None | Polypropylene | 10 | Standard | Standard DOE | ||
| XTL5T10A3 | Quote Required | TBD | Wound | 5 gal/min per 10 inch | Polypropylene | Industrial Process Filtration Division | 2-1/2 | N/A | Industrial | 1 | Clarification/Prefiltration/Polishing | domnick hunter | Polypropylene | No treatment | 5 | No Cover | DOE | None | Glass Filled Polypropylene | 10 | Standard | Standard DOE |
