- Availability & Price
- Search SKU
Filter by attributes
- Core Cover Material
- Core Type
- End Cap Configuration
- End Cap Finish
- End Cap Material
- Length (inch)
- Media
- Micron Rating (µm)
- Packaging
- Seal Material
Filter by manufacturer
Recently viewed products
-
Parker 100-12180100 - NEXCLEAR® PVC Clear General Service Tubing, Series 100 -
Parker 20FF20-825 - Front and Back Ferrules for Two Ferrule Tube Fittings - A-LOK Series -
Parker CBG1S2TSL - FULFLO CB SINGLE BAG FILTER VESSELS | CARBON STEEL, 304 & 316 SS, NON-ASME CODE DESIGN FOR PROCESS LIQUID FILTRATION
Fulflo XTL Wound Filter Cartridges | Extended life design technology for increased life and performance
*PRODUCT IMAGE IS REPRESENTATIVE PROVIDED BY THE MANUFACTURER. DO NOT MAKE BUYING DECISIONS SOLEY BASED ON THE IMAGE. PLEASE VERIFY SPECIFICATIONS MEET YOUR REQUIREMENTS.
The unique construction of Parker’s patented Fulflo® XTL™ (extended life) filter cartridges provides twice the average life of conventionally wound filter cartridges for process fluid filtration. Computer modeling has optimized the wound cartridge geometry maximizing the use of the internal cartridge surface area. The enhanced design provides improved dirt-holding capacity (twice the average) over standard wound cartridges, while providing true controlled depth filtration.
Fulflo XTL cartridges are available in nominal (90%) ratings of 1μm, 3μm, 5μm, 10μm, 20μm and 30μm.
Features/Benefits
• Result in significant cost savings based on fewer system interruptions, decreased labor expenses for change outs, & reduced inventory and cartridge disposal costs
• Unique computer programming capability permits the design and manufacture of special cartridge constructions to suit requirements of nearly any filtration application
• “M” polypropylene and “C” cotton materials are FDA listed as acceptable for potable and edible liquid contact according to CFR Title 21
• Continuous strand roving geometry provides performance consistency
• XTL wound cartridges fit all Fulflo vessels and most competitive vessels without compromising final product clarity or flow characteristics of the cartridge. The most noticeable difference is the extended life savings offered by XTL cartridges
• Extended center cores are available in tinned steel, 316 stainless steel and 304 stainless steel
• A special snap-in extender is available for polypropylene cores
• FDA grade polypropylene (DOE only) certified to ANSI/NSF61 standard for contact with drinking water components
Applications
• Potable Liquid Filtration
• Organic Solvent Filtration
• Process Water Filtration
• Photoprocessing Filtration
• Lubricant Filtration
• R.O. Pre-filtration
• Amines Filtration
• Chemical Process Filtration
Read More...Fulflo XTL cartridges are available in nominal (90%) ratings of 1μm, 3μm, 5μm, 10μm, 20μm and 30μm.
Features/Benefits
• Result in significant cost savings based on fewer system interruptions, decreased labor expenses for change outs, & reduced inventory and cartridge disposal costs
• Unique computer programming capability permits the design and manufacture of special cartridge constructions to suit requirements of nearly any filtration application
• “M” polypropylene and “C” cotton materials are FDA listed as acceptable for potable and edible liquid contact according to CFR Title 21
• Continuous strand roving geometry provides performance consistency
• XTL wound cartridges fit all Fulflo vessels and most competitive vessels without compromising final product clarity or flow characteristics of the cartridge. The most noticeable difference is the extended life savings offered by XTL cartridges
• Extended center cores are available in tinned steel, 316 stainless steel and 304 stainless steel
• A special snap-in extender is available for polypropylene cores
• FDA grade polypropylene (DOE only) certified to ANSI/NSF61 standard for contact with drinking water components
Applications
• Potable Liquid Filtration
• Organic Solvent Filtration
• Process Water Filtration
• Photoprocessing Filtration
• Lubricant Filtration
• R.O. Pre-filtration
• Amines Filtration
• Chemical Process Filtration
| Action | Part No. | Availability | Partner Available | Price | Specifications Met | Filter Construction | Function | Media | Flow Rate | Inside Diameter | Brand | Industry | Division | Outside Diameter | Micron Rating (µm) | Core Type | End Cap Material | Seal Material | Media | Packaging | End Cap Finish | Length (inch) | Core Cover Material | End Cap Configuration |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| XTL3C20SZ | Quote Required | TBD | FDA | Wound | Clarification/Prefiltration/Polishing | Cotton FDA Grade | 5 gal/min per 10 inch | 1 | domnick hunter | Oil and Gas | Industrial Process Filtration Division | 2-1/2 | 3 | 316 Stainless steel | None | Standard DOE | COTTON FDA GRADE | Individual Poly Bag | No treatment | 20 | No Cover | DOE | ||
| XTL3C29-4S | Quote Required | TBD | FDA | Wound | Clarification/Prefiltration/Polishing | Cotton FDA Grade | 5 gal/min per 10 inch | 1 | domnick hunter | Oil and Gas | Industrial Process Filtration Division | 2-1/2 | 3 | 316 Stainless steel | None | Standard DOE | COTTON FDA GRADE | Standard | No treatment | 29 1/4 | No Cover | DOE | ||
| XTL3C30S | Quote Required | TBD | FDA | Wound | Clarification/Prefiltration/Polishing | Cotton FDA Grade | 5 gal/min per 10 inch | 1 | domnick hunter | Oil and Gas | Industrial Process Filtration Division | 2-1/2 | 3 | 316 Stainless steel | None | Standard DOE | COTTON FDA GRADE | Standard | No treatment | 30 | No Cover | DOE | ||
| XTL3C39-4 | Quote Required | TBD | FDA | Wound | Clarification/Prefiltration/Polishing | Cotton FDA Grade | 5 gal/min per 10 inch | 1 | domnick hunter | Oil and Gas | Industrial Process Filtration Division | 2-1/2 | 3 | Tinned steel | None | Standard DOE | COTTON FDA GRADE | Standard | No treatment | 39 | No Cover | DOE | ||
| XTL3C39-4G | Quote Required | TBD | FDA | Wound | Clarification/Prefiltration/Polishing | Cotton FDA Grade | 5 gal/min per 10 inch | 1 | domnick hunter | Oil and Gas | Industrial Process Filtration Division | 2-1/2 | 3 | 304 Stainless steel | None | Standard DOE | COTTON FDA GRADE | Standard | No treatment | 39 | No Cover | DOE | ||
| XTL3C39-4S-DO-AZ | Quote Required | TBD | FDA | Wound | Clarification/Prefiltration/Polishing | Cotton FDA Grade | 5 gal/min per 10 inch | 1 | domnick hunter | Oil and Gas | Industrial Process Filtration Division | 2-1/2 | 3 | 316 Stainless steel | Polypropylene | Polyfoam gasket | COTTON FDA GRADE | Individual Poly Bag | No treatment | 39 | No Cover | DOE with gaskets | ||
| XTL3C40S | Quote Required | TBD | FDA | Wound | Clarification/Prefiltration/Polishing | Cotton FDA Grade | 5 gal/min per 10 inch | 1 | domnick hunter | Oil and Gas | Industrial Process Filtration Division | 2-1/2 | 3 | 316 Stainless steel | None | Standard DOE | COTTON FDA GRADE | Standard | No treatment | 40 | No Cover | DOE | ||
| XTL3M10SY | Quote Required | TBD | FDA, ANSI/NSF61 | Wound | Clarification/Prefiltration/Polishing | Polypropylene FDA grade | 5 gal/min per 10 inch | 1 | domnick hunter | Food and beverage | Industrial Process Filtration Division | 2-1/2 | 3 | 316 Stainless steel | None | Standard DOE | POLYPROPYLENE FDA GRADE | Standard | No treatment | 10 | Polypropylene | DOE | ||
| XTL3M20A | Quote Required | TBD | FDA, ANSI/NSF61 | Wound | Clarification/Prefiltration/Polishing | Polypropylene FDA grade | 5 gal/min per 10 inch | 1 | domnick hunter | Food and beverage | Industrial Process Filtration Division | 2-1/2 | 3 | Polypropylene | None | Standard DOE | POLYPROPYLENE FDA GRADE | Standard | No treatment | 20 | No Cover | DOE | ||
| XTL3M30A | Quote Required | TBD | FDA, ANSI/NSF61 | Wound | Clarification/Prefiltration/Polishing | Polypropylene FDA grade | 5 gal/min per 10 inch | 1 | domnick hunter | Food and beverage | Industrial Process Filtration Division | 2-1/2 | 3 | Polypropylene | None | Standard DOE | POLYPROPYLENE FDA GRADE | Standard | No treatment | 30 | No Cover | DOE | ||
| XTL3M39-4A | Quote Required | TBD | FDA, ANSI/NSF61 | Wound | Clarification/Prefiltration/Polishing | Polypropylene FDA grade | 5 gal/min per 10 inch | 1 | domnick hunter | Food and beverage | Industrial Process Filtration Division | 2-1/2 | 3 | Polypropylene | None | Standard DOE | POLYPROPYLENE FDA GRADE | Standard | No treatment | 39 | No Cover | DOE | ||
| XTL3M40A | Quote Required | TBD | FDA, ANSI/NSF61 | Wound | Clarification/Prefiltration/Polishing | Polypropylene FDA grade | 5 gal/min per 10 inch | 1 | domnick hunter | Food and beverage | Industrial Process Filtration Division | 2-1/2 | 3 | Polypropylene | None | Standard DOE | POLYPROPYLENE FDA GRADE | Standard | No treatment | 40 | No Cover | DOE | ||
| XTL3T10A | Quote Required | TBD | N/A | Wound | Clarification/Prefiltration/Polishing | Polypropylene | 5 gal/min per 10 inch | 1 | domnick hunter | Industrial | Industrial Process Filtration Division | 2-1/2 | 3 | Polypropylene | None | Standard DOE | Polypropylene | Standard | No treatment | 10 | No Cover | DOE | ||
| XTL3T30A | Quote Required | TBD | N/A | Wound | Clarification/Prefiltration/Polishing | Polypropylene | 5 gal/min per 10 inch | 1 | domnick hunter | Industrial | Industrial Process Filtration Division | 2-1/2 | 3 | Polypropylene | None | Standard DOE | Polypropylene | Standard | No treatment | 30 | No Cover | DOE | ||
| XTL3T30GV-TC-E | Quote Required | TBD | N/A | Wound | Clarification/Prefiltration/Polishing | Polypropylene | 5 gal/min per 10 inch | 1 | domnick hunter | Industrial | Industrial Process Filtration Division | 2-1/2 | 3 | 304 Stainless steel | Polypropylene | EPR | Polypropylene | Standard | No treatment | 30 | Non Woven Polyester | 222 O-ring/Flat cap | ||
| XTL3T40A-TC-E | Quote Required | TBD | N/A | Wound | Clarification/Prefiltration/Polishing | Polypropylene | 5 gal/min per 10 inch | 1 | domnick hunter | Industrial | Industrial Process Filtration Division | 2-1/2 | 3 | Polypropylene | Polypropylene | EPR | Polypropylene | Standard | No treatment | 40 | No Cover | 222 O-ring/Flat cap | ||
| XTL3WC30 | Quote Required | TBD | N/A | Wound | Clarification/Prefiltration/Polishing | White cotton | 5 gal/min per 10 inch | 1 | domnick hunter | Oil and Gas | Industrial Process Filtration Division | 2-1/2 | 3 | Tinned steel | None | Standard DOE | WHITE COTTON | Standard | No treatment | 30 | No Cover | DOE | ||
| XTL3WC30G | Quote Required | TBD | N/A | Wound | Clarification/Prefiltration/Polishing | White cotton | 5 gal/min per 10 inch | 1 | domnick hunter | Oil and Gas | Industrial Process Filtration Division | 2-1/2 | 3 | 304 Stainless steel | None | Standard DOE | WHITE COTTON | Standard | No treatment | 30 | No Cover | DOE | ||
| XTL3WC30SV | Quote Required | TBD | N/A | Wound | Clarification/Prefiltration/Polishing | White cotton | 5 gal/min per 10 inch | 1 | domnick hunter | Oil and Gas | Industrial Process Filtration Division | 2-1/2 | 3 | 316 Stainless steel | None | Standard DOE | WHITE COTTON | Standard | No treatment | 30 | Non Woven Polyester | DOE | ||
| XTL5C10 | Quote Required | TBD | FDA | Wound | Clarification/Prefiltration/Polishing | Cotton FDA Grade | 5 gal/min per 10 inch | 1 | domnick hunter | Oil and Gas | Industrial Process Filtration Division | 2-1/2 | 5 | Tinned steel | None | Standard DOE | COTTON FDA GRADE | Standard | No treatment | 10 | No Cover | DOE |
