2, 3 and 5 Valve instrument manifolds, needle pattern, direct mount - H Series

Parker's instrumentation manifolds designed typically for direct installation to pressure or differential pressure (flow) measurement devices in a host of critical applications, being fully in conformance to DIN/IEC 61518. The prime purpose is to assist the operation, maintenance, calibration and service of those devices, with functionality including block & bleed, double block & bleed, isolate & calibrate, isolate & vent/drain/bleed, isolate and equalise.

Parker's direct mount instrument manifolds are available in 2, 3 and 5-valve configurations in pressure ratings up to 6,000 psi (414 bar) and in a wide range of materials. Extruded H section or T section are only available in stainless steel.

As standard, Parker manifolds have inlet and outlet interface connections in full accordance with DIN/IEC 61518. For the Manifold to Transmitter interface, the type B connection is standard, type A is optionally available. Parker's manifolds are available with a wide array of connection types and sizes. For the ultimate in safety, reliability, speed, and ease of installation all manifolds can be specified with integral tube connections utilising Parker A-LOK® (Two Ferrule) or CPITM (Single Ferrule) compression fitting technologies. This will also ultimately reduce overall user costs. As standard, these direct mount manifolds are offered with Parker's unique PTFree connectTM style solutions to inlet connections and other ports (such as vent). The PTFree connect™ system enables users to assemble tube lines to any of the manifold ports without the need for PTFE tape or liquid sealant. Manifolds can also be supplied with male connectors using the same thread form as the PTFree connect™. They are provided factory fitted, pin locked and tested.

Industries:

• Oil and Gas

• Chemical

• Petrochemical

• Power Generation

• Nuclear

• Transportation

Features/Benefits:

• Metal-to-metal seats to ensure 100% bubble-tight shut-off

• Secure anti-vibration gland lock nut

• Bonnet locking pin

• Anti-blowout low torque back seating stem

• Gland thrust bush for uniform packing compression and tight sealing

• Ergonomic T-bar handles with positive retention

• Functional colour coded dust caps for identification

• Externally adjustable gland

• Annealed sealing washers guarantee 100% sealing assurance

• Variety of end connections including integral compression fittings for reduced overall user costs

• Long and short pattern designs available

• Wide range of corrosion resistant materials

• Bodies and bonnets fully traceable to original material source

• Certification according to BS EN 10204 3.1 for material and pressure test is available

• A line diagram describing flow paths on the body of all manifolds

Applications:

• Pressure, Flow and Level measurement

• Lubrication skids

• Water Treatment

• Chemical injection skids

• Hydraulic systems for wellhead control

• Emergency shut down

• Pumping packages

• Gas booster systems

• Test equipment